How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask airheatman Your Own Question
airheatman
airheatman, HVAC Technician
Category: HVAC
Satisfied Customers: 7776
Experience:  Furnace, A/C and heat pump specialist.
16514686
Type Your HVAC Question Here...
airheatman is online now
A new question is answered every 9 seconds

My RPH 10EAMER furnace does not have the blower motor come

Customer Question

my RPH 10EAMER furnace does not have the blower motor come on, but the fan operates in AC and in Fan mode. I was thinking it may be a fan limit switch.
JA: Did you check the furnace's filters?
Customer: Yesm there are replaced and new
JA: Do you plan on doing the work yourself?
Customer: Yes
JA: Anything else we should know to help you best?
Customer: Everything else works fine
Submitted: 1 month ago.
Category: HVAC
Expert:  airheatman replied 1 month ago.

If everything else works up until blower the relay on the control board is not closing.Board will have to be replaced.The reason it works in Cool mode is that is a different relay.

Part number for board is 62-24257-02

Related HVAC Questions