How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask airheatman Your Own Question
airheatman
airheatman, HVAC Technician
Category: HVAC
Satisfied Customers: 7706
Experience:  Furnace, A/C and heat pump specialist.
16514686
Type Your HVAC Question Here...
airheatman is online now
A new question is answered every 9 seconds

OK, the inducer motor comes on ignitor comes on burners

Customer Question

OK, the inducer motor comes on ignitor comes on burners light, then go back out
JA: I'll do all I can to help. How long have you been dealing with this?
Customer: just happened
JA: Do you plan on doing the work yourself?
Customer: yes
JA: Anything else we should know to help you best?
Customer: i tested the flame sensor resistance was 0
Submitted: 1 month ago.
Category: HVAC
Expert:  airheatman replied 1 month ago.

Have you tried cleaning the flame sensor? If not lets start there, Here is a generic video explain how.

https://www.youtube.com/watch?v=tYwR9qL4lnk

If that does not solve issue we will go from here.

Customer: replied 1 month ago.
I said resistance was 0
Customer: replied 1 month ago.
Posted by JustAnswer at customer's request) Hello. I would like to request the following Expert Service(s) from you: Live Phone Call. Let me know if you need more information, or send me the service offer(s) so we can proceed.

Related HVAC Questions