How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask HVAC Guru Your Own Question
HVAC Guru
HVAC Guru, HVAC TECH
Category: HVAC
Satisfied Customers: 13997
Experience:  15yrs in the HVAC industry with certificates and degrees.
21107370
Type Your HVAC Question Here...
HVAC Guru is online now
A new question is answered every 9 seconds

I have a quadrafire 1200 pellet stove and the auger stopped

Customer Question

i have a quadrafire 1200 pellet stove and the auger stopped working. i've had this happen once before and replaced the auger and it was fine. i put in a new motor and nogood. so i replaced the vacuum switch (being 16 years old) and still no luck. i took the cover off control box it flashes blue lights that come on and off but i don,t know if that means any thing. the fan speed switchs work call light on ?
JA: I'll do all I can to help. How long have you been dealing with this?
Customer: about 2 weeks waiting for parts mostly
JA: Do you plan on doing the work yourself?
Customer: yes
JA: Anything else we should know to help you best?
Customer: fire pot ok if you hand feed it. fuse ok
Submitted: 1 month ago.
Category: HVAC
Expert:  HVAC Guru replied 1 month ago.

Hello, one minute while I get some information together.

Expert:  HVAC Guru replied 1 month ago.

What pattern is the light flashing?

Customer: replied 1 month ago.
a single flash about every 5 seconds for 6 times
Customer: replied 1 month ago.
no phone call please
Expert:  HVAC Guru replied 1 month ago.

Have you checked all the snap discs?

Customer: replied 1 month ago.
no . how do i can i jump the wires? or test with multimeter on what setting?
Expert:  HVAC Guru replied 1 month ago.

Just press all of them and see if any are tripped and will reset

Customer: replied 1 month ago.
if i pullwire off snap disk 2 fan goes off if i pull wire off#1 call light goes off #3 has a reset button i pushed it it does'ntreally move.what do you meanpress them all only #3 up on auger has a reset button?
Expert:  HVAC Guru replied 1 month ago.

If they all have continuity they are working and does the call light come on solid?

Customer: replied 1 month ago.
Expert:  HVAC Guru replied 1 month ago.

Watch this video and see if this helps

CLICK HERE

Customer: replied 1 month ago.
i watched video i mixed up order of disk 1&2 do you think i should replace disk 1 ? i do have one