Have HVAC Questions? Ask an HVAC Expert for Answers
Hello,My name is ***** ***** I will do my best to assist you. I am looking over your question now and will respond shortly.
Can you tell me what color wire was on what terminal in old thermostat?
And what equipment do you have? Gas furnace, heat pump etc?
I am sorry I was waiting for picture
you can use the attach file link by dialog box
Thank you...is this a zoned system or 2 totally separate thermostats with heating/cooling?
Thank you...and you just need to see how the TX wires to each to replace correct?
ok just minute while I write up
Old to new
Rc/rh red and orange to TX Rc/Rh
C brown to TX C
Y1 yellow to TX Y
Y2 blue to TX Y (with yellow)
white w1 to TX w
green g to TX g
This is the one with orange and red to Rc.rh......doing other one now
I am sory but the pictures switched position in my que so only half of that is right. I will put all wiring on 1 sheet
Picture 1 Here
Picture 2 Here
Ask any questions you need to
1. Since the LUX thermostat does not have a W but instead a W1 and a W2, I suppose that in both cases I connect to the W1?.........That is correct
2. In your pic #1, since the RC and the RH are bridged together in both the Braeburn and the LUX thermostats -can I connect to either the RC or RH on the LUX thermostat that is also bridged?.........Also correct.
Your biggest difference is on the one thermostst you have Y1 and Y2...on the TX these both go to Y
You are very welcome...just rate service at top of page to close for now. If you have any issues just return here as you have 30 days of follow up after rating