How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 5648
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
23932409
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

My xc90 trane will not throw any heat, Filters are new,

Customer Question

My xc90 trane will not throw any heat
JA: Did you double-check the thermostat's settings? And what about the filters?
Customer: Filters are new, thermostat is set for 68 but it's only 63 in the house
JA: Do you plan on doing the work yourself?
Customer: I remember this happened a few years ago on a cold winter weekend. The serviceman saved me a call by having me to something on the panel but I don't remember what it was now. My house just went on the market and a serviceman can't get out here until Thursday!
JA: Anything else we should know to help you best?
Customer: Not that I can think of. Can't I reset it somehow?
Submitted: 1 month ago.
Category: HVAC
Expert:  HVAC Guru replied 1 month ago.

Hello, one minute while I get some information together.

Expert:  HVAC Guru replied 1 month ago.

Hello and thanks for using this service! If you are a JA Member I would like to personally thank you and welcome you back! I am HVAC Guru an extremely experienced tech on the site and I try to get to as many customers as I can. NOTE it takes time for me to type research and add links so please wait for me to respond back I can only do this so fast. Secondly, I do not know your skill level so please try and let me know if I am going beyond your knowledge or comfort zone thanks! I strive for a 5 star rating from everyone especially our JA members.

Are there any error codes flashing on the board in the unit?