How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 5648
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

355 furnace keeps blowing fuses. Replaced inducer motor.

Customer Question

355 Bryant furnace keeps blowing fuses.
Replaced inducer motor.
Checked thermostat wire
All low voltage wires
Power off power on code 42 flashes have to hit switch deferral times before led is constant. Could it be ??
Submitted: 15 days ago.
Category: HVAC
Expert:  Webb-Guy replied 15 days ago.

Hello and welcome to just answer and I will be the one to try and assist you. The code 42 means it is the inducer motor have you checked to make sure the wiring is not loose?

Related HVAC Questions