How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Airheatman Your Own Question
Airheatman, HVAC Technician
Category: HVAC
Satisfied Customers: 7518
Experience:  Furnace, A/C and heat pump specialist.
Type Your HVAC Question Here...
Airheatman is online now
A new question is answered every 9 seconds

I have a Luxaire furnace model # G8T10012UHB11A. The furnace

Customer Question

I have a Luxaire furnace model # G8T10012UHB11A. The furnace lites but goes out after blower moter turns on. Its code .flashes 1 time. What should I do next?
Submitted: 21 days ago.
Category: HVAC
Expert:  Airheatman replied 21 days ago.

If you are getting a I flash code during call for heat you have a failing control board.This indicates that flame was sensed when there was not a call for heat.

See flash code chart on page 25 in this manual

Related HVAC Questions