How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 5648
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
23932409
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

I moved the thermostat and now screen is blank, think im not

Customer Question

I moved the thermostat and now screen is blank
JA: Just to clarify, do you think this is a larger HVAC problem, or something specific to the thermostat?
Customer: think im not getting power to themo
JA: Do you plan on doing the work yourself?
Customer: yes
JA: Anything else we should know to help you best?
Customer: when i moved wire i taped them all togehter
Submitted: 2 months ago.
Category: HVAC
Expert:  airheatman replied 2 months ago.

Did you turn off power to indoor unit before moving wires?

Customer: replied 2 months ago.
No I didn't know any better
Expert:  airheatman replied 2 months ago.

OK probably blew a little 3 or 5 amp fuse n unit if wires touched.Give me model on indoor air handler or furnace and I will tell you where to look.

Expert:  airheatman replied 2 months ago.

Are you on site where you can get me the model on unit? We are going to be looking for a small fuse in that unit.

http://i.imgur.com/90juVsc.png

http://i.imgur.com/kYe4Epz.png