How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 5648
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

I got water in my basement and it looks like the blower

Customer Question

I got water in my basement and it looks like the blower motor got wet. Now when I try to fire it the green light flashes and will not reset
JA: How long has this been going on? And how severe is the problem?
Customer: just one time about 2 weeks ago
JA: Do you plan on doing the work yourself?
Customer: I would like to. I all ready pulled the motor to see if it was holding water ,but it seemed dry
JA: Anything else we should know to help you best?
Customer: The only thing I did not check is if the blower motor for the vents and returns was under water or not . I'm going to do that right now
Submitted: 1 month ago.
Category: HVAC
Expert:  Rick replied 1 month ago.

Welcome to Just Answer, my name is ***** ***** I will do my best to help you with your issue. First I’ll need some more info so I have a more complete picture of you situation.

What is the brand and model number of your unit?

Customer: replied 1 month ago.
Beckett R7184B
Customer: replied 1 month ago.
motor # 21805
Expert:  Rick replied 1 month ago.

Ok, that's the burner ignition control. I need the brand an model of the boiler or furnace it's mounted on.

Expert:  Rick replied 1 month ago.

There seems to be a problem with your account. If you want a call please contact customer service or we can continue here.

Customer: replied 1 month ago.
Armstrong Furnaces
Expert:  Rick replied 1 month ago.

Ok, have you established a call for heat (thermostat set higher than room temp)? if so then try holding the reset button down for 30 seconds

Customer: replied 1 month ago.
I don't want the call
Expert:  Rick replied 1 month ago.

Ok, what about my last response

Expert:  Rick replied 1 month ago.

What happened when you followed my last instructions?

Related HVAC Questions