How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask BillyHvac Your Own Question
BillyHvac, Journeyman HVAC Tech
Category: HVAC
Satisfied Customers: 22012
Experience:  Endorsed for unlimited heating, cooling, oil burners, boilers, refrigeration, hydronics
Type Your HVAC Question Here...
BillyHvac is online now
A new question is answered every 9 seconds

Have a G2D95CT080v 6C-2 A furnace located in a garage. Need

Customer Question

Have a G2D95CT080v 6C-2 A furnace located in a garage. Need informal if this is a combustion furnace ok for garage installation
JA: Did you check the furnace's filters?
Customer: yes
JA: Do you plan on doing the work yourself?
Customer: No, already installed in a garage. Is this the correct application for this furnace.
JA: Anything else we should know to help you best?
Customer: No, just that question
Submitted: 2 months ago.
Category: HVAC
Expert:  BillyHvac replied 2 months ago.


My name is ***** ***** I will do my best to assist you. I am looking over your question now and will respond shortly.

Expert:  BillyHvac replied 2 months ago.


This furnace is ok IF....

If there are no registers, return or supply, in the garage.

If the drain has been heat taped.

If the furnace is raised off the floor at least 12"

No registers because we do not want a passage for exhaust into home.

Heat taped to prevent drain from freezing

Above floor so no ignition device (motor spark) near flammable vapors


Expert:  BillyHvac replied 2 months ago.

I apologize..but typo...the unit must be 18" above floor

Related HVAC Questions