How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 5648
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

I have a Hunter 44150B thermostat that I just want to

Customer Question

I have a Hunter 44150B thermostat that I just want to deprogram and set for one cooling and one heating temperature
Submitted: 1 month ago.
Category: HVAC
Expert:  BillyHvac replied 1 month ago.


My name is Billy.

All you need to do is set to your temp and then press HOLD....It will now be a regular thermostat.

If you switch to heat...set temp..and then hold.

NO program will run until the hold button is pressed again.

Do you have any other questions to be clear?

Customer: replied 1 month ago.
I have already tried this. It will keep temperature temporarily but change it to some preset a few hours later
Expert:  BillyHvac replied 1 month ago.

Then you have a thermostat issue. With this model...once HOLD is selected it is to remain until the HOLD/CLEAR is pressed again.

If it is reverting back to program on its own you have a defect in the thermostat

Related HVAC Questions