How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask airheatman Your Own Question
airheatman
airheatman, HVAC Technician
Category: HVAC
Satisfied Customers: 7776
Experience:  Furnace, A/C and heat pump specialist.
16514686
Type Your HVAC Question Here...
airheatman is online now
A new question is answered every 9 seconds

Trying to replace old then heat pump t-stat with a Rodgers

Customer Question

Trying to replace old then heat pump t-stat with a white Rodgers brand. Old thermostat is as follows
R-R
G-G
Y-Y
Black wire to B
Orange wire to X
White to W2
And a jumper from W2 to E
The new t-stat is listed as follows
B is energized in heat/emergency mode
O energized in cool and off mode
Y 1st stage heat and cool compressor
G blower fan
C 24 Vac common optional
W aux and emergency heat 1st stage
And of course rc and rh
Submitted: 3 months ago.
Category: HVAC
Customer: replied 3 months ago.
Old stat was a rheem and I am also installing new Payne condenser that will need help wireing also
Expert:  airheatman replied 3 months ago.

For thermostat: Old to new:

R-RC with jumper to RH
G-G
Y-Y
Black wire to O for the Payne unit
Orange wire to C
White to AUX/E.

Vive me model on Payne unit and let me know what wires you had outside on the Rheem

Related HVAC Questions