How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 5648
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
23932409
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

We are replacing a & thermostat with a Honeywell. None of

Customer Question

We are replacing a White & Rogers thermostat with a Honeywell. None of the letters on the W&R thermostat have the lettering the Honeywell does. How do we know what wire goes where?
JA: Just to clarify, do you think this is a larger HVAC problem, or something specific to the thermostat?
Customer: Thermostat. It quit working yesterday when our power went off.
JA: Do you plan on doing the work yourself?
Customer: Yes
JA: Anything else we should know to help you best?
Customer: White wire attached to W
Green wire attached to G
red wire attached to RC with a red jumper wire from Rh to RC
Blue wire attached to Y
Submitted: 3 months ago.
Category: HVAC
Expert:  Rick replied 3 months ago.

Welcome to Just Answer, my name is ***** ***** I will do my best to help you with your issue. If my initial response doesn’t answer your question then let me know and we can continue our conversation.

The config you spell out sounds good for a typical heat/AC system. Is that how you have it wired on the new thermostat?

Expert:  Rick replied 3 months ago.

Do you have any more questions?