How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask BillyHvac Your Own Question
BillyHvac
BillyHvac, Journeyman HVAC Tech
Category: HVAC
Satisfied Customers: 22120
Experience:  Endorsed for unlimited heating, cooling, oil burners, boilers, refrigeration, hydronics
12672042
Type Your HVAC Question Here...
BillyHvac is online now
A new question is answered every 9 seconds

Have 4TEE3F39A1000AA Air handler. I think that it set as a

Customer Question

have 4TEE3F39A1000AA Air handler . I think that it set as a Horizontal right configuration. I also think that the coil is in backwards. Can the coil be flipped? The wide part of the coil is facing the blower.
Submitted: 4 months ago.
Category: HVAC
Expert:  BillyHvac replied 4 months ago.

Hello,

My name is Billy,

Can you post pictures of the install? Or we can go by description..I can also draw how it should be....will you be leaving this in a horiz position?

Customer: replied 4 months ago.
Customer: replied 4 months ago.
The return is on the right and the air handler section is
on the left.
Expert:  BillyHvac replied 4 months ago.

Thank you...was viewing factory drawings.

And you are saying the A coil open end is facing the blower?

Customer: replied 4 months ago.
Can you send the factory drawings? Can the coil be flipped?
Customer: replied 4 months ago.
Are you there?
Customer: replied 4 months ago.
hello
Customer: replied 4 months ago.
hello hello
Expert:  BillyHvac replied 4 months ago.

The top of the coil should point towards blower .

air enters and is drawn through the large open end and through the coil.

If your air is entering the top part of coil it is backwards.

Manual

Customer: replied 4 months ago.
What about the service bulletin for flipping the coil to the correct position?
Expert:  BillyHvac replied 4 months ago.

Now this is a Horiz left flow if I see the pics right....air enters right and goes out left?

See here

And the flipping is is in the manual but you would just be doing it in reverse from the downflow configuration

Related HVAC Questions