How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 5648
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

I have a Breezeaire WEK3000 It appears to be displaying a

Customer Question

I have a Breezeaire WEK3000 It appears to be displaying a fault code. Its difficult to read but I believe its either a code P8 or PA. the unit is running and cooling fine and shuts on and off but occasionally the blower or fan sounds like it running faster for a about 10 seconds and then goes back to normal.
Submitted: 2 months ago.
Category: HVAC
Expert:  Phil replied 2 months ago.

Hello, so far it sounds like the fan motor bearings are worn out and causing the blower to slow down or stop occasionally, and that is tripping the units internal safety switches (not resettable).

Tell me about how old the unit is and if you have pretty good electrical/electronics skills and a multi meter, I will advise you from there.