How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 5648
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
23932409
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

I'm a maintenance Technician Dept store at the mall. I'm

Customer Question

Hello, My name is***** a maintenance Technician Dept store at the mall. I'm trying to troubleshoot a FIT box. The diagnostic : is FLOW SENSOR FAILLURE, Air valve position is at 79%. What should I look at first or repair??
Submitted: 4 months ago.
Category: HVAC
Expert:  Phil replied 4 months ago.

Hello, first and most importantly you need to locate the pneumatic controls diagram for the store you are at...then locate the flow sensor by use of the diagram. Then get me the brand and model number of the flow sensor and I will pull the tech data on it.

It is most likely that the air bleed orifice in the flow sensor is clogged with debris.

We can go from there

Customer: replied 4 months ago.
ok thanks Phil, I'm looking for the pneumatic controls diagram now.
Expert:  Phil replied 4 months ago.

Great, I will be here for you