How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 5648
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
23932409
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

I was changing my filter and unplugged my furnace by

Customer Question

I was changing my filter and unplugged my furnace by mistake, now it won't come on, what did i do
Submitted: 4 months ago.
Category: HVAC
Expert:  Rick replied 4 months ago.

Welcome to Just Answer, my name is ***** ***** I will do my best to help you with your issue. If my initial response doesn’t answer your question then let me know and we can continue our conversation.

Check the blower compartment panel. I'm assuming the filter is in the blower compartment. The panel must be properly in place so it pushes in the panel switch. If it's not put back properly then there will be no power to the unit.