How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 5648
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
23932409
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

Installed New control board no power to board, Just put the

Customer Question

Installed New control board no power to board
JA: I'll do all I can to help. How long have you been dealing with this?
Customer: Just put the board in do you have a number I can call?
JA: Do you plan on doing the work yourself?
Customer: Yes I am doing it
JA: Anything else we should know to help you best?
Customer: Trying to make sure I have the wires going to the correct terminals
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the HVAC Technician about your situation and then connect you two.
Submitted: 4 months ago.
Category: HVAC
Expert:  Tim H. replied 4 months ago.

Hi, I'm Tim and I'm an HVAC expert here to help answer your question(s). Please provide all the information I ask for since I'm not onsite. At the end of our dialog you will be asked to rate my service, but please wait until then and all your question(s) have been answered satisfactorily. If you are not satisfied, I'd appreciate it if you'd tell me why before leaving a negative rating and allow me to continue to work with you until we are able to both agree on an outcome to follow. Thanks for your business!

I'll need some background information here to help. What are we working with here? Make and full model? Why did you replace board?