How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 5648
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
23932409
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

Trying to get the part numbers capacitors on a 036JAZ, both

Customer Question

trying to get the part numbers for the capacitors on a 036JAZ, both large and small.
JA: I'll do all I can to help. How long have you been dealing with this?
Customer: last 3 days. I'm in Alabama 100 plus degrees
JA: Do you plan on doing the work yourself?
Customer: I'm Handicapped. so no. but do have a certified ac tech helping. I get the partsw and he will install
JA: Anything else we should know to help you best?
Customer: nope that should help an awful lot
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the HVAC Technician about your situation and then connect you two.
Submitted: 5 months ago.
Category: HVAC
Expert:  airheatman replied 5 months ago.

I will ne happy to help you. Please give me the numbers that precede the 036JAZ.

Should be something like RAKA RPKA,RACB or similar

Customer: replied 5 months ago.
UPMD
Expert:  airheatman replied 5 months ago.

Thanks for this information.Give me just a few minutes to get this information for you.

Expert:  airheatman replied 5 months ago.

OK a couple more questions

1. Does fan appear to be original or a replacement fan?

2.I am showing a dual capacitor of 35/3 uF as factory capacitor.Do you have a separate compressor and fan cap?

3.Iam also showing that Ruud installed a black round start capacitor on some of these UPMD unit- Are you looking for this also or just the gray/silver run capacitor?

Expert:  airheatman replied 5 months ago.

If no start capacitor it looks like they used the 50/5/370 capacitor which is part number 43-26261-15

http://keithspecialty.com/k/Rheem-43-25133-25.htm

Expert:  airheatman replied 5 months ago.

If you had the start capacitor it will look like this

https://www.amazon.com/88-106-Capacitor-43-17075-04-Rheem-Protech/dp/B009AXEVOE