How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 5648
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
23932409
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

What should be considered max gh side pressure on 3 zone

Customer Question

what should be considered max high side pressure on 3 zone mini how about a normal low and normal high at 90 o/s air 75 i/s air
Submitted: 5 months ago.
Category: HVAC
Expert:  Phil replied 5 months ago.

Tell me what refrigerant it uses

each type runs at different pressures, R-410 runs over 450 psig at times

R22, half that

Customer: replied 5 months ago.
r410
Expert:  Phil replied 5 months ago.

THe condenser runs 20 to 25F hotter than the outside air, so the head pressure would be between 360 and more likely 390 when the system is fully loaded.

http://screencast.com/t/YWaKj1F6

Its time to rate my work now, its how I earn a living and does not affect your charges. In return I will hold the question open to you for any follow up needed.

THanks!

Related HVAC Questions