How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 5648
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

I just bought a replacement fan motor brooder house exhaust

Customer Question

I just bought a replacement fan motor for my brooder house exhaust fan. The old Motor had 2 speeds and 3 wires, red, white and black. This new motor 3M505J has me totally confused. The instructions on the motor says the following:
High Speed Low Speed In the Motor there is just a plate to screw
Black T1 Black T1 Wires to:
Red T2 Red T2 T1 Has a black wire from motor
Line 2 L2 Line 1 L1 connected to it.
Line 1 L1 Line 2 L3 T2 Has a Red wire from motor
connect to it.
L1,L2 & L3 have screws for
wires to.
T3 is a stub for a slip connection.
How do I attach my red, black and white wires to this motor? The instructions don't say anything about the white wire.
Submitted: 4 months ago.
Category: HVAC
Expert:  Phil replied 4 months ago.

Hello, use the paper clip icon at the right end of the tool bar above, or the 'attach files' link to the left of your send button to send me 4 or 5 photo's of the motor wiring and hopefully the paper wiring diagram glued to the side of the motor.

photo's need to be well lit and well focused.

We can go from there.

Related HVAC Questions