How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask BillyHvac Your Own Question
BillyHvac, Journeyman HVAC Tech
Category: HVAC
Satisfied Customers: 21998
Experience:  Endorsed for unlimited heating, cooling, oil burners, boilers, refrigeration, hydronics
Type Your HVAC Question Here...
BillyHvac is online now
A new question is answered every 9 seconds

My raypak 206 starts to igninite and the gives an ing code

Customer Question

My raypak 206 starts to igninite and the gives an ing code and will not light. What needs to be cleaned or replaced
Submitted: 4 months ago.
Category: HVAC
Expert:  BillyHvac replied 4 months ago.


Quite often all that is needed is to clean and buff the ignition rod/sensors.

They may look clean but they develop a glaze coating which hinders the flame rectification process.

Use steel wool and clean all metal ignition parts and rods...blow out burner area...make sure gas supply to unit.