How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask BillyHvac Your Own Question
BillyHvac
BillyHvac, Journeyman HVAC Tech
Category: HVAC
Satisfied Customers: 22090
Experience:  Endorsed for unlimited heating, cooling, oil burners, boilers, refrigeration, hydronics
12672042
Type Your HVAC Question Here...
BillyHvac is online now
A new question is answered every 9 seconds

Replacing Lennox 68j8401 control board with new 100269-05

Customer Question

Replacing Lennox 68j8401 control board with new 100269-05 control board. Have 6 wires that I have no idea where they go
Submitted: 6 months ago.
Category: HVAC
Expert:  Gaztech replied 6 months ago.

Welcome to Just Answer, my name is ***** ***** I will do my best to help you with your issue.

If my initial response doesn’t answer your question then let me know and we can continue our conversation.

NOTE: I can only get paid for assisting you if you click FINISHED and RATE ANSWER after you are satisfied with answer.

Are you ready?

Customer: replied 6 months ago.
Yep
Customer: replied 6 months ago.
What info do you need
Expert:  Gaztech replied 6 months ago.

Stand by, just studying both boards

Expert:  Gaztech replied 6 months ago.

can you take a clear picture of the 6 wires you need to connect and the board

Customer: replied 6 months ago.
On 68j8401 I have a blue wire that comes from thermostat wire to screw terminal labeled T. There is no T terminal on new board I also have 2 brown wires that connect to spade terminals labeled C & L. The new board has one spade terminal labeled 24v & L
Expert:  BillyHvac replied 6 months ago.

hello,

Do you still need help? My name is ***** ***** different tech

T is no longer used. It was a anticipator...L is the same...it was for a light or alarm no longer used.

Are your other wires the C R W O Y?

Customer: replied 6 months ago.
Pictures attached
Expert:  BillyHvac replied 6 months ago.

yep, you have a newer board which does not need the thermistor wires (purple T) or the L wire.

See this booklet towards back...the T and L are discussed and the diagrams show changeout....HERE

Related HVAC Questions