How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 6022
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
23932409
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

I moVed into my new home with a Marco vented fireplace. The

Customer Question

I moVed into my new home with a Marco vented fireplace. The logs are not set correctly. I am looking for a log diagram. The m/n is 794052
Submitted: 10 months ago.
Category: HVAC
Expert:  Gaztech replied 10 months ago.
Welcome to Just Answer, my name is ***** ***** I will do my best to help you with your issue.If my initial response doesn’t answer your question then let me know and we can continue our conversation.NOTE: I can only get paid for assisting you if you click FINISHED and RATE ANSWER after you are satisfied with answer.Are you ready?
Customer: replied 10 months ago.
Expert:  Gaztech replied 10 months ago.
Hello, Can you verify model no. please, the one you provided is not listed that is a serial no.
Customer: replied 10 months ago.
M/N 794052 S/N WH1315
Expert:  Gaztech replied 10 months ago.
Thanks for picture, there is no info for that unit, take a clear picture of logs and stove, let's see if we can figure it out
Customer: replied 10 months ago.
The logs are not aligned correctly and there is a lot of soot on the windows
Expert:  Gaztech replied 10 months ago.
Bottom looks ok. the upper and lower logs has creases that will allow a seating match. like a puzzle try matching them as best you can, then lite it up and try to adjust position of logs so that tip of flames are not covered by logs as this will have a sooting mark on logs
Customer: replied 10 months ago.
I tried that. That is why I was looking for the log diagram
Expert:  Gaztech replied 10 months ago.
I realise that but , no info available so lets use common sense
Customer: replied 10 months ago.
Thanks for your common sense but not for your expertise on my original question