How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 5648
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
23932409
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

Billy, My furnace stopped working, so i had a technician

Customer Question

Hey Billy,
My furnace stopped working, so i had a technician come out to diagnose the issue. He said the ifc board was bad, so i replaced it myself. I wasn't getting a troubleshooting code before, but now it is blinking 3 times, saying the limit is open. I've pressed the buttons in on all three limits switches, but it doesn't seem to help. Can you please help me bypass the limit switches since i don't have an ohm meter?
Submitted: 8 months ago.
Category: HVAC
Expert:  BillyHvac replied 8 months ago.

hello,

what board number did you replace with?