How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 5648
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
23932409
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

I have a System 2000 oil furnace. Came home tonight and the

Customer Question

I have a System 2000 oil furnace. Came home tonight and the control module was flashing 140 degrees. I hit the main switch to shut it down, turned it back on and held the reset button. It'll run for about 30-45 seconds, then shut down. I pulled the front cover, and it did "latch out" with solid amber and red lights. I just bled the line, and nothing different.
Submitted: 9 months ago.
Category: HVAC
Expert:  Daniel Plourde replied 8 months ago.

hi i am dan i can help you with this. first i need a little more information. how old is the furnace and when is the last time it was cleaned? also do you have a meter to check some electrical parts?

Related HVAC Questions