How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Gaztech Your Own Question
Gaztech
Gaztech, HVAC Technician
Category: HVAC
Satisfied Customers: 412
Experience:  Owner at Gaztech
92290868
Type Your HVAC Question Here...
Gaztech is online now
A new question is answered every 9 seconds

Have a Allagash stove with automatic ignition. The wind blew

Customer Question

Hi have a Allagash stove with automatic ignition. The wind blew the pilot out and now it will not light. when I put the pilot switch on CPI and turn the burner to on a red light starts blinking. What's the next step?
Submitted: 10 months ago.
Category: HVAC
Expert:  Gaztech replied 10 months ago.

Hello, just reviewing info on that model

Expert:  Gaztech replied 10 months ago.

Can you give me more info, Jotul Model#

Customer: replied 10 months ago.
Allagash GF 300 DV IPI
Expert:  Gaztech replied 10 months ago.

Thanks

Expert:  Gaztech replied 10 months ago.

In the mean time can you shut power off to reset and back on it 1 min

Customer: replied 10 months ago.
I have done that twice. It does not seem like the gas is flowing. Also what is the red light?
Expert:  Gaztech replied 10 months ago.

IFC Battery Replacement A red LED on the IFC board indicates low battery power. 1. Switch Burner to OFF and disconnect power to the stove. 2. Access the battery box from behind the right side of the control compartment. See fig. 45. Disengage it from the hook & loop tape. 3. Install four, 1.5v AAA batteries and return box to the compartment. 4. Reconnect power to the stove.

NOTE TO CUSTOMER: Please take the time to "Rate" the service from the technician. If they are not rated they are not credited for assisting. If you require further information please use "reply".

Customer: replied 10 months ago.
Did that and still no gas to the pilot and the red light still comes on
Expert:  Gaztech replied 10 months ago.

Are you on propane?

You might be out of gas?

Do you hear ignitor sparking at the pilot assembly?

Customer: replied 10 months ago.
no
Expert:  Gaztech replied 10 months ago.

Your back !!

After resetting power before light turns on turn stat to on can you see o hear spark at the ignitor in the stove?

Expert:  Gaztech replied 10 months ago.

Can you rate conversation PLEASE?????