How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 5648
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
23932409
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

Have a riello rdb oil burner was working fine yesterday but

Customer Question

Have a riello rdb oil burner was working fine yesterday but today no hot water or radiators heating up was serviced in November all new parts
Submitted: 11 months ago.
Category: HVAC
Customer: replied 11 months ago.
Can I get a refund please just paid £21 for nothing I think ....
Expert:  Gaztech replied 11 months ago.

Hello, let's try to get it going, I will need more details to help you..

Customer: replied 11 months ago.
Hi when turned on boiler was very quite running then pressed the reset button it's like it fired up for a minute or so then a click and it turned its self but still running ?
Expert:  Gaztech replied 11 months ago.

You say ???? it's like it fired up for a minute or so then a click and it turned its self but still running ?

Not sure what you are saying..

Customer: replied 11 months ago.
It's programmed to come on at 6 In the morning to heat radiators and hot water it's a riello rdb oil boiler it came on but water was not hot and radiators never heated up when I pressed the reset button it's like it fired up making the right noise but then a click and it went quite again
Expert:  Gaztech replied 11 months ago.

what is the model of your ignition module on your Riello?

Customer: replied 11 months ago.
I'm not sure what the ignition module is ? But the pump was replaced new fuel line , firing pin and new solinoid box in November
Expert:  Gaztech replied 11 months ago.

Press on the reset for 40 seconds, it sould flash 2 times and then go...

Customer: replied 11 months ago.
Tried that twice it did start but light never flashed twice it went on tho but turned itself off after about a minute
Expert:  Gaztech replied 11 months ago.

Oil flow restriction, Did you go low on oil? filter on tank replaced? do that asap

Customer: replied 11 months ago.
Not low on oil and tank is a new 1 about 2 years old
Expert:  Gaztech replied 11 months ago.

I have to punch out, I will let someone else help you. sorry!!

Customer: replied 11 months ago.
No thanks I'll try some one local hope I'm not paying for this !

Related HVAC Questions