How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 5648
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
23932409
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

My name ***** *****. Heil furnace won't light, showing 2

Customer Question

Hi, my name ***** *****. Heil furnace won't light, showing 2 flash code meaning pressure switch open . install new pressure switch, check vent lines and condensate line all clear, even install new draft motor will not light, keep showing 2 flash code. model# *****
JA: Thanks. Can you give me any more details about your issue?
Customer: jump t-stat furnace won't light, check for 24v to board from tran, 24v from tran good, draft motor come on with call for heat, blower come on for 90 sec then goes off then furnace show normal heart beat for 30 sec. then 2 flash code again
JA: OK got it. Last thing — HVAC Technicians generally expect a deposit of about $18 to help with your type of question (you only pay if satisfied). Now I'm going to take you to a page to place a secure deposit with JustAnswer. Don't worry, this chat is saved. After that, we will finish helping you.
Submitted: 9 months ago.
Category: HVAC
Expert:  airheatman replied 9 months ago.

Can you verify the pressure switch is indeed closing?

Customer: replied 9 months ago.
LIT ONCE, THEN BURNERS WENT OFF, THEN 2 FLASH CODE CAME ON
Customer: replied 9 months ago.
new pressure switch and draft motor
Customer: replied 9 months ago.
can there be a board issue
Expert:  airheatman replied 9 months ago.

Yes if pressure switch is indeed closing and opening board may be defective not sensing it opening and closing.Do you have a meter to see if switch is opening and closing?