How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask airheatman Your Own Question
airheatman
airheatman, HVAC Technician
Category: HVAC
Satisfied Customers: 7724
Experience:  Furnace, A/C and heat pump specialist.
16514686
Type Your HVAC Question Here...
airheatman is online now
A new question is answered every 9 seconds

I have a Honeywell RTH2410 thermostat I'm trying to hook up

Customer Question

I have a Honeywell RTH2410 thermostat I'm trying to hook up to an old system. The old system has wires labeled Y, G, R, O, C, & W2/E (on the same wire). Does the W2/E wire go into W/Aux and where does the C wire go? Thank you.
Submitted: 10 months ago.
Category: HVAC
Expert:  airheatman replied 10 months ago.

First of all let me point out that all though you can use this thermostat it is not ideal for use with the heat pump with backup heat. Note that there is no EMERGENCY heat selection on thermostat.

If you still want to proceed, yes the W2/E wire will go to W/AUX.

Common is not used with the 2410 so it will be taped off.