How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask BillyHvac Your Own Question
BillyHvac
BillyHvac, Journeyman HVAC Tech
Category: HVAC
Satisfied Customers: 22096
Experience:  Endorsed for unlimited heating, cooling, oil burners, boilers, refrigeration, hydronics
12672042
Type Your HVAC Question Here...
BillyHvac is online now
A new question is answered every 9 seconds

I'm about to replace a old honeywell thermostat installed 60

Customer Question

hello, I'm about to replace a old honeywell thermostat installed 60 years ago with the oil furnace, no thermopump or air conditioning system added, I bought the model RTH2300B 1020, on the old device there is only one white and one black wire. My first question is the new model mentioned compatible, my second one would which wire goes where on the connecting bar, the "gas or oil" sliding bar should be on the left or right??
thank you for the help, it is much appreciated! Richard B"
Submitted: 11 months ago.
Category: HVAC
Expert:  BillyHvac replied 11 months ago.

Hello,

My name is ***** ***** ready to begin?

Expert:  BillyHvac replied 11 months ago.

Black to R (rh)

and white to W

switch on back set for gas/oil

Related HVAC Questions