How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 7603
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
23932409
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

Where do i connect the power source honeywell aquastat L4006

Customer Question

where do i connect the power source for my honeywell aquastat L4006 to Kingston ksz oil boiler
Submitted: 11 months ago.
Category: HVAC
Expert:  Phil replied 11 months ago.

Hello

I will be referring to this manual tell me if it looks like your boiler or not,

http://www.crownboiler.com/documents/kingston_installation_manual.pdf

Expert:  Phil replied 11 months ago.

That is a steam boiler however, it should not need any aguastat controller at all if it comes with all of the control devices shown on the wiring diagram

If it is being used as a hot water boiler however you would fit an aguastat as shown here below

http://screencast.com/t/UQt4MzSnq

any and all work on a steam boiler should be checked by a licensed boiler contractor

Thanks for letting me work with you. When we are finished,if my answer has been polite, professional, and thorough,please locate the 'rate your expert button' and click one of the ratings .If you still need help let me know!.

Rating will not increase your charges, nor close the question, but is how I earn my living.