How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 5648
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
23932409
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

Code 105 on brand new burner

Customer Question

Code 105 on brand new burner
Submitted: 11 months ago.
Category: HVAC
Expert:  Phil replied 11 months ago.

Hello

Is this the boiler you have?

http://screencast.com/t/vdKR2qO2

Tell me what the dealer or installer has to say about the problem.

Next tell me if you have experience with oil burning boilers or not and if you have purged the oil pump of air?

We can go from there.

Customer: replied 11 months ago.
fuel running fine, burner resets but no ignition
Expert:  Phil replied 11 months ago.

Thanks, ***** ***** be several causes. Sparking rods getting no spark or badly adjusted, or dirty.

CAD cell (lense that detects flame) covered in soot, or defective, or bad wire connections.

Fuel nozzle not getting enough pressure to atomize the fuel properly, wrong fuel nozzle so that the spark is too far from the fuel spray cone to ignite it, has also to do with how the burner head is set up at the factory or by the installer.

Let me know if you need training on setting up a burner properly, and to what extent, and how much time you have for me to train you on these topics.

We can go from there.