How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask BillyHvac Your Own Question
BillyHvac
BillyHvac, Journeyman HVAC Tech
Category: HVAC
Satisfied Customers: 22255
Experience:  Endorsed for unlimited heating, cooling, oil burners, boilers, refrigeration, hydronics
12672042
Type Your HVAC Question Here...
BillyHvac is online now
A new question is answered every 9 seconds

I have mt Vernon stove the auto clean does not work replaced

Customer Question

hi I have mt Vernon stove the auto clean does not work replaced springs and clean pot was reading auto clean jammed befor I did this not working at all
Submitted: 1 year ago.
Category: HVAC
Customer: replied 1 year ago.
not sure if motor on auto clean is working how can I check it and how do I get to it could it be bearing on auto clean arm it no codes coming up on thermostat it did read auto clean jammed no codes now but not dumping ash this is a Quadrafire pellet stove
Expert:  BillyHvac replied 1 year ago.

I apologize for the holiday delay.

Do you still need assistance?

Customer: replied 1 year ago.
still need help with this its a mt Vernon Quadra fire pellet stove the code was auto clean jammed clean pot replaced springs stove works but auto clean mode does not builds up with ash not dumping in ash pan how do I check motor or motor arm how do I replace motor if that's is what wrong plate under pot moves feely

Related HVAC Questions