How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 5648
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
23932409
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

I'm working on a trane furnace and my pressure switch reads

Customer Question

Hi I'm working on a trane furnace and my pressure switch reads error flashes 3x. I replaced it with new factory one. I also cleaned all the tubes and water is flowing. When I shut it off and turn it back on I have to turn the on and off switch to make it come on can you tell me what might be the issue
Submitted: 11 months ago.
Category: HVAC
Expert:  airheatman replied 11 months ago.

Have you checked intake and exhaust for blockage.Even a spider web in them can cause pressure switch not to close.

Customer: replied 11 months ago.
Customer: replied 11 months ago.
I did that cleaned all the hoses and trap
Expert:  airheatman replied 11 months ago.

Do you have a meter to check vacuum in water column to see id inducer is pulling adequate vacuum based on label on switch?