How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 5648
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
23932409
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

I have a York Gas furnace with a Rodgers 50E47-070 control.

Customer Question

I have a York Gas furnace with a White Rodgers 50E47-070 control. It gets into a mode where the Hot surface Igniter glows for a period of time and then there ignitintion but 3sec later it drops out. It will than recycle again but the same thing will take place.
The WHite Rodgers module gives a diagnostic flash 1 time.
Submitted: 11 months ago.
Category: HVAC
Expert:  Tim H. replied 11 months ago.

Hi, I'm Tim and I'm an HVAC expert here to help answer your question(s). Please provide all the information I ask for since I'm not onsite. At the end of our dialog you will be asked to rate my service, but please wait until then and all your question(s) have been answered satisfactorily. Thanks for your business!

Have you tried cleaning the flame sensor?

Customer: replied 11 months ago.
substitute a like unit. ( pse-yk1 )
Expert:  Tim H. replied 11 months ago.

Please look up the flash code you are getting on your furnace and tell me exactly what it says for that code?

Related HVAC Questions