How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask BillyHvac Your Own Question
BillyHvac
BillyHvac, Journeyman HVAC Tech
Category: HVAC
Satisfied Customers: 22115
Experience:  Endorsed for unlimited heating, cooling, oil burners, boilers, refrigeration, hydronics
12672042
Type Your HVAC Question Here...
BillyHvac is online now
A new question is answered every 9 seconds

I have a laser 56 type 1. I have removed all the old burner

Customer Question

I have a laser 56 type 1. I have removed all the old burner coating. Is there supposed to be a round raised bubble centered in the bottom of the burner assembly?
Submitted: 11 months ago.
Category: HVAC
Expert:  BillyHvac replied 11 months ago.

hello,

please check the parts HERE

Then tell us what part number you refer to