How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 6022
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
23932409
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

I have a 8 year carrier furnace which is now giving a fault

Customer Question

I have a 8 year carrier furnace which is now giving a fault code 34, cannot see the igniters glowing. What can I do?
Submitted: 1 year ago.
Category: HVAC
Expert:  airheatman replied 1 year ago.

Turn power off to furnace and thermostat off. Then power back on and call for heat.Tell me if igniter ever lights and if we get a different code before the lockout code.

Customer: replied 1 year ago.
Still no igniter. Fault light stayed on steady until I called for heat. I was able to ignite the burners with a long match. It is heating the house nicely, but I know that it is going to cut off when it gets to set heat and we'll be right back where we started.
Expert:  airheatman replied 1 year ago.

OK tell me which of these two igniters your furnace has, (Carrier used both)

http://i.imgur.com/mJUuj4O.jpg

http://i.imgur.com/sRPjdy6.jpg