How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 5648
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
23932409
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

I have a HVAC unit Model # GY9S100C16UP11J What happens is I

Customer Question

I have a HVAC unit Model # *****
What happens is I have a fault code #8 Ignition locked out due to recycles
What happens is the burner lights off but after about 10 seconds the flame drops out it continues to relight but again the flame drops out, eventually it locks out.
Can it be the hot surface igniter (flame rod)that is bad?
Submitted: 12 months ago.
Category: HVAC
Expert:  gotoman for ac replied 12 months ago.

Should be a flame sensor located in last or next to last burner. It senses flame. If it is dirty it will cause flame to drop out. Pull sensor and clean with sand paper and retry . Russ