How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 5648
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
23932409
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

American standard furnace. Blows but no heat. Igniter

Customer Question

American standard furnace. Blows but no heat. Igniter works/glows, no gas presented to igniter. Red light is constant flash. No intervals to flashing
Submitted: 12 months ago.
Category: HVAC
Expert:  airheatman replied 12 months ago.

1. Has unit been working and just stopped?

2.Positive gas is ON to the furnace?

3.Do you have a multi meter for troubleshooting?

Customer: replied 12 months ago.
1. Was working and just stopped
2. Yes gas is on
3. I can go pick up a multi meter if needed
Expert:  airheatman replied 12 months ago.

OK our first step will be to see if we are getting 24 volts to the gas valve when igniter glows

Related HVAC Questions