How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask BillyHvac Your Own Question
BillyHvac
BillyHvac, Journeyman HVAC Tech
Category: HVAC
Satisfied Customers: 22251
Experience:  Endorsed for unlimited heating, cooling, oil burners, boilers, refrigeration, hydronics
12672042
Type Your HVAC Question Here...
BillyHvac is online now
A new question is answered every 9 seconds

I know very little about pellet stoves. I have a quadrafire

Customer Question

I know very little about pellet stoves. I have a quadrafire pellet stove. It seems to be on, but the auger will not feed. I read a lot of forums about the snap switches, but these snap switches do not have reset buttons. I appreciate any help.
Submitted: 1 year ago.
Category: HVAC
Expert:  BillyHvac replied 1 year ago.

hello, do you have a meter to test the switches for continuity?

The only way the disk can prevent auger is if it opened and did not close...usually the auger is a board issue

Related HVAC Questions