How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask airheatman Your Own Question
airheatman
airheatman, HVAC Technician
Category: HVAC
Satisfied Customers: 7993
Experience:  Furnace, A/C and heat pump specialist.
16514686
Type Your HVAC Question Here...
airheatman is online now
A new question is answered every 9 seconds

I have a Carrier 58STA10116 with a code 33. I bypass the

Customer Question

I have a Carrier 58STA10116 with a code 33. I bypass the main limit switch and the furnace runs fine. I reaplaced the main limit switch today and still get the code 33. I go back into bypassing the main limit and it works fine.
Submitted: 1 year ago.
Category: HVAC
Expert:  airheatman replied 1 year ago.

The heat chamber is getting too hot for some reason.have you checked filter and blower to make sure they are not dirty?

Expert:  airheatman replied 1 year ago.

Dirty blower wheel or dirty ac coil are two most likely causes.(If you have ac)Extreme case, could be a bad heat exchanger.I would check the blower, filter and ac coil if you have ac first.

Related HVAC Questions