How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask airheatman Your Own Question
airheatman
airheatman, HVAC Technician
Category: HVAC
Satisfied Customers: 7724
Experience:  Furnace, A/C and heat pump specialist.
16514686
Type Your HVAC Question Here...
airheatman is online now
A new question is answered every 9 seconds

I have a Reznor ft60 that when it starts, it blows out

Customer Question

Hi, I have a Reznor ft60 that when it starts, it blows out exhaust then turns on the flame. As soon as the fan starts, the flame goes out and fan continues to run
Submitted: 1 year ago.
Category: HVAC
Expert:  airheatman replied 1 year ago.

When blower comes on does the flame dance around moving it away from the flame sensor?

Customer: replied 1 year ago.
No, actually goes out as soon as the blower engages.
Customer: replied 1 year ago.
Flame goes out first then fan runs
Customer: replied 1 year ago.
I cleaned the flame sensor previously
Expert:  airheatman replied 1 year ago.

Ceck all connections on board and make sure they are clean and making good contact.Also check to make sure ground is good. if so, I am suspecting a bad board

Customer: replied 1 year ago.
Ok, I'll check all connections and tighten
Expert:  airheatman replied 1 year ago.

If connections are good, I suspect board

Related HVAC Questions