How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 5648
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
23932409
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

I have a Carrier 58PAV Furnace and the fan stopped working

Customer Question

Hi! I have a Carrier 58PAV Furnace and the fan stopped working last night. How bad could this be, please?
Submitted: 1 year ago.
Category: HVAC
Customer: replied 1 year ago.
I get a 13 error code, the heater is working but then it stops because the fan doesn't kick in. |Also, when I try to manually start the fan, from the remote control, nothing the fan deoesn't start.
Expert:  airheatman replied 1 year ago.

The error 13 is a limit code. I may be as simple as a resttable flame rollout switch or as serious as an issue causing main limit to open.Can you do some hands on and do you have a meter for troubleshooting?cc

Expert:  airheatman replied 1 year ago.

Ok Is se in second post the fan is not coming on. This may be a bad control board , a bad capacitor or a motor.let me know about the meter