How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 6022
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
23932409
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

My tempstar 7000 worked all summer but turned in on would

Customer Question

my tempstar 7000 worked all summer but turned in on for heat would not start, I found that theehaust blower was bad and replaced it with a new blower and capacitor. It now blows air thur the ehaust blower but does not fire up ..no heat
Submitted: 1 year ago.
Category: HVAC
Expert:  airheatman replied 1 year ago.

1.What is complete model on furnace? It will be inside above burners on left or right panel

2.Does board have a light for error codes and if so what is pattern of flashing?

Customer: replied 1 year ago.
ft05-eh01 not at home at this time, do not see a board with a flashing lite.
Customer: replied 1 year ago.
can you send me a phone number? I will be home at 6
PM easatern time
Expert:  airheatman replied 1 year ago.

Not familiar with model.Did you get that from the furnace label on inside panel above burners?

Customer: replied 1 year ago.
Can I call you later when I get at the furnace location. Around 6 PM ?
Customer: replied 1 year ago.
Are you there??????
Expert:  airheatman replied 1 year ago.

I have t leave around 6:15 to go to my Gran Daughters birthday party.I will opt out so other experts online at that time may assist you.

Customer: replied 1 year ago.
OK
Expert:  Tim H. replied 1 year ago.

Hi, I'm Tim and I'm an HVAC expert here to assist you with your questions. Please provide all information I request as it makes it more difficult to troubleshoot something when I'm not there onsite. Essentially, you become my eyes and ears. Thanks for the opportunity to help. At the end of our dialog, you will have a chance to rate my service, but please wait until we are finished and you're satisfied you have all the information you need.

Did you still need assistance with this?

Related HVAC Questions