How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 5648
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
23932409
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

I have a unit that I can't get started. There doesn't seem

Customer Question

I have a unit that I can't get started. There doesn't seem to be any pilot. The fan runs . The had been shut off for remodeling and after that I can't get it going. Any sugestions?
Submitted: 1 year ago.
Category: HVAC
Expert:  Phil replied 1 year ago.

Hello, its an electronic ignition furnace, no pilot light.

Tell me if you had a lot of sheet rock work done or not, that dust can block the AC coil and then when the furnace starts it will go off on its high temperature safety cut out.

If you can attach a clear well focused photo of the wiring diagram, glued to the inside of the blower access panel I can mark it up with trouble shooting directions, Use the paper clip icon at the right end of the tool bar above for that.

It is possible that door switch on the blower service door is also not closed properly, look at that also.

We can go from there.

Customer: replied 1 year ago.
It is dark now but will look in the morning at the door switch
Expert:  Phil replied 1 year ago.

That will work, see you in the morning.

.

Related HVAC Questions