How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask BillyHvac Your Own Question
BillyHvac
BillyHvac, Journeyman HVAC Tech
Category: HVAC
Satisfied Customers: 22421
Experience:  Endorsed for unlimited heating, cooling, oil burners, boilers, refrigeration, hydronics
12672042
Type Your HVAC Question Here...
BillyHvac is online now
A new question is answered every 9 seconds

Do I have a problem with my IBC on my CV90+5 when I only get

Customer Question

Do I have a problem with my IBC on my CV90+5 when I only get power to system circ motor
when the boiler itself is heating and not when zone valve end switches or end switch of
zone valve for DHW are asking for heat.................????
Submitted: 1 year ago.
Category: HVAC
Expert:  BillyHvac replied 1 year ago.

The circ pump should run the entire time the system/zone is calling for heat. The loop may be satisfied..but the pump should run.