How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask BillyHvac Your Own Question
BillyHvac
BillyHvac, Journeyman HVAC Tech
Category: HVAC
Satisfied Customers: 22429
Experience:  Endorsed for unlimited heating, cooling, oil burners, boilers, refrigeration, hydronics
12672042
Type Your HVAC Question Here...
BillyHvac is online now
A new question is answered every 9 seconds

I have a Rheem (Ruud) gh Eff. Furnace with a Code # 58, no

Customer Question

I have a Rheem (Ruud) High Eff. Furnace with a Code # ***** no water present in system. How do I get rid of the fault and get the unit running again? Will jumping the sensor out restart the unit. Residential Unit's Model#R92PA6601317 MSA SERIAL#W491401771.
I do have repair experience repairing furnaces.
Charles **********
Submitted: 1 year ago.
Category: HVAC
Expert:  BillyHvac replied 1 year ago.

you can bypass, but there are commonly 2 of these so follow the wires as they are in series. Also use a shop vacuum to suck out furnace drain...the sensors are reading the internal collector box and there may be water not visible in there.

Related HVAC Questions