How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask airheatman Your Own Question
airheatman
airheatman, HVAC Technician
Category: HVAC
Satisfied Customers: 7771
Experience:  Furnace, A/C and heat pump specialist.
16514686
Type Your HVAC Question Here...
airheatman is online now
A new question is answered every 9 seconds

I just purchased a Trane XL824 Thermostat. My current

Customer Question

I just purchased a Trane XL824 Thermostat.
My current thermostat has the following wiring connected -
White
RH with a jumper to RC
Green
and yellow
There is a Blue wire that is not connected and was tucked in the wire opening.
I tried to hook up the XL824 with the W,RH, G and Y and nothing happened (blank screen).
I tried to add the Blue to the B/C terminal and still nothing.
Any suggestions? Your help is appreciated.
Steve
Submitted: 1 year ago.
Category: HVAC
Expert:  airheatman replied 1 year ago.

1. Do you have gas heat? If so remove top panel and give me model from label inside furnace above burners on side panel.

2. Give me model on old thermostat

3. Tell me what terminal each color wire went to on old thermostat.