How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 5648
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
23932409
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

I have a payne AC unit Model No. PF4MNA025. The inside unit

Customer Question

I have a payne AC unit Model No. PF4MNA025. The inside unit is not working. Is there a reset button? If so, where is it located?
Thanks
***** *****
Submitted: 1 year ago.
Category: HVAC
Expert:  Tim H. replied 1 year ago.

Yes, good luck! Thank you for using Just Answer and please don't forget to rate my service as that's how experts get paid (Thanks in advance for any bonus left). Otherwise experts work at their own time and expense. Feel free to post back with any additional questions.

Are you saying the blower inside is not coming on during AC operation?

Customer: replied 1 year ago.
Expert:  Tim H. replied 1 year ago.

Open the bottom compartment and find the blower and blower wheel. With power off, does blower spin freely?

Customer: replied 1 year ago.
I do not have the tools with me to open the unit. It is a rental and i am away from home. So icannot proceed at this time
Expert:  Tim H. replied 1 year ago.

This is just a standard forced air furnace, right? Shouldn't need any tools if that's the case.

Expert:  Tim H. replied 1 year ago.

If you need to wait until you're home and/or you have tools, thats find. Question will remain open.

Customer: replied 1 year ago.
I am going to have to call an HVAC company. The way this unit is installed in the closet makes it impossible for me to open it up.
Expert:  Tim H. replied 1 year ago.

OK, I can certainly understand your decision to call in a pro.

Related HVAC Questions